Contact adhesives come in a wide variety of different applications. Some of the best known examples include epoxy adhesive, glue boards, glue tape, polyurethane glue, MDF (medium-density fiberboard) and melamine. However, as a woodworker it's not necessary to know all these details, since there are many other uses for these chemicals that are not as well known. In fact, if you take the time to look through some woodworking journals you'll find that there are many more applications that have never been heard of before.

Water-based contact adhesives have many advantages over solvent-based ones. The main one is that they can be used on a much wider range of projects. Water-based ones are also more durable, which is especially useful if you're working with wood and you need something that can withstand the rigors of both wet and dry. Solvent-based adhesives tend to dry out quickly when exposed to moisture. Also, solvent-based adhesives tend to contain a high amount of glue. This can lead to excess glue build-up, which can potentially lead to the failure of your project.

Liquid Nails are another form of contact adhesives that are gaining popularity as they can provide a great deal of flexibility and laminates that are highly durable. Laminates that contain phenol resins or nitrocellulose are especially popular for use in bonding. Because they contain phenol resins, these laminates offer a much higher shear strength than solvents. Phenol resins also offer a much higher amount of glue per unit volume. They are sometimes called liquid glue and are usually sold in blocks of about 25 sheets. Block type products may have less shear strength than micro ABS plastic, but it is hard to tell from the product description.


PVD (PVC) is a compound that is made of an extremely durable metal called PVC. A material known as PVC is also known as Polyvinyl Choloride. It is also commonly known as "plasticizer". There are two different qualities to this material; very low elasticity and a very high strength. PVC can be used as isolation, elastomeric or in a full fledged glue block. It can even be used as a filler in joints where other bonding agents have failed completely, due to its high shear strength.

It should be noted that in order to achieve a good bond, contact adhesives must be applied at least 100% together. You can use a mixture of up to two layers of adhesives on one surface, if you so desire. The best way to apply them is to mix a few drops of glue into a small volume of water. Then use a rag or brush to apply them to your chosen two surfaces. For best results, try doing the test in a well ventilated area. It is wise to ensure that the surfaces are completely dry before you apply them.

The glue used for contact adhesives is an extremely versatile and effective compound. It can be used almost anywhere, and is often used in conjunction with epoxy resins and UV curing agents to provide a strong bonding agent that cures into a hard film. This film will prevent the plastic laminate from moving or rubbing off, causing a messy mess and frustrating your patience. Best products from Best Reviews Tips UK The only drawbacks of using plastic laminate glue as a bonding agent are that it tends to peel after some time, leaving behind large scratches in the material. It also attracts dust and dirt, which can be an issue when cleaning the surfaces of your furniture.

The two most common types of contact adhesives used in laminates are either silicon or metallo-butylmethacrylate. These laminates are commonly referred to as 'glass-cement' or 'neoprene'. These laminates have been found to be particularly suitable for use on all sorts of plastics and they have recently been developed specifically to replace certain more commonly used bonding agents such as urethane, ethyl methacrylate (EMA) and epoxy.

There are several ways to test the strength of your contact adhesive. If you would like to gauge its shear strength, hold the item in a pull test bar. Hold the other end of the bar against a thick layer of foam and see if the glue will hold onto the foam for adequate amounts of time. Another method of determining the strength of a bonding agent is to apply it to a thin slice of plywood and mark the position of where the bond should adhere. Then attach strips of paper to the location where you marked the position, wait for the adhesive to dry, then scrape away the excess paper and pull the strip back. These tests will allow you to gauge the strength of your contact adhesive.